Power servo drives are used on all three axes.
Very compact vertical telescopic arm for low overall height and double speed for short in/out time.
The integrated control cabinet is mounted behind the horizontal axis for valuable space saving.
The integrated control cabinet allows electrical connection external I/O modules for the attached peripheral equipments.
Additional A&B axis are available while C-axis is the standard one for flexibilities of placing the parts in different orientation.
Other SW7 series, Z-axis (horizontal stroke) will be driven via rock and pinion for high speeds, precision long life operation even if the length is increased to over 4000mm.
Very compact vertical telescopic arm for low overall height and double speed for short in/out time.
The integrated control cabinet is mounted behind the horizontal axis for valuable space saving.
The integrated control cabinet allows electrical connection external I/O modules for the attached peripheral equipments.
Additional A&B axis are available while C-axis is the standard one for flexibilities of placing the parts in different orientation.
Other SW7 series, Z-axis (horizontal stroke) will be driven via rock and pinion for high speeds, precision long life operation even if the length is increased to over 4000mm.
| Unit:mm | ||||||||||||||||
| Model | X | X reach | Y | YM1 | YM2 | Z | L | W | H | Hs | Mh | Payload/Kgs | I.m.m | |||
| SW7512 | 730 | 1195 | 1200 | 300 | 900 | 1800 | 2790 | 1887 | 1837 | 500 | E10 | 10 | 200-650T | |||
| SW7515 | 1020 | 1485 | 1500 | 400 | 1100 | 2160 | 3150 | 2177 | 2087 | 600 | E12 | 15 | 350-780T | |||
| SW7518 | 1320 | 1785 | 1800 | 500 | 1300 | 3120 | 4110 | 2477 | 2337 | 700 | E15 | 15 | 500-1300T | |||
| SW7520 | 1320 | 1785 | 2000 | 500 | 1500 | 3120 | 4110 | 2477 | 2457 | 700 | E15 | 15 | 500-1800T | |||
